Optimus PRO LX5 II manual Unpacking, PRO-LX5II Two-Way Die-CastSpeaker

40-4078.fm Page 1 Wednesday, August 11, 1999 10:48 AM

Cat. No. 40-4078

PRO-LX5 II Two-Way Die-Cast Speaker

Your PRO-LX5 II Two-Way Die-Cast Speaker is small in size, but not in sound! Its 5-inch polypropylene woofer accurately tracks signals to provide out- standing bass, while the wide-angle di- pole tweeter produces crisp, detailed highs with 360× dispersion.

Your speaker’s acoustic design match- es the woofer and tweeter with the en- closure and damping materials to provide amazingly smooth and broad frequency response.

Your PRO-LX5 II can handle up to 130 watts of power. The speaker is magnet- ically shielded, so you can safely place it next to your television or monitor.

UNPACKING

Your PRO LX5 II is shipped in protec- tive packing materials. Before you use the speaker, follow these steps to un- pack it.

Caution: To avoid damaging the speaker’s tweeter, do not touch the tweeter’s film while you are unpacking the speaker.

1.Remove the corrugated board and the plastic foam packing box.

2.Remove the plastic cover from the tweeter.

3.Carefully place the top grille on the speaker, making sure not to touch

the tweeter’s plastic film with the cover.

Corrugated

Board

Top

Grille

Plastic Foam

Packing

Box (Top)

Plastic

Cover

Tweeter

Front

GrilleTweeter

Film

© 1998 Tandy Corporation.

All Rights Reserved.

RadioShack is a registered trademark used by Tandy Corporation.