Optimus SCP-84 owner manual illus, Set the adapter’s voltage switch to

14-1225.fm Page 9 Friday, July 2, 1999 9:00 AM

Cautions:

•The recommended AC adapter supplies 3 volts and delivers at least 300 milliamps. Its center tip is set to negative, and its plug correctly fits the DC 3V jack on the bottom of the SCP-84. Using an adapter that does not meet these specifications could damage the SCP-84 or the adapter.

•Always plug the AC adapter’s barrel plug into the SCP-84 before you plug its power module into the AC outlet, and unplug its power module from the AC outlet before you unplug its barrel plug from the SCP- 84.

Follow these steps to connect an AC adapter to the SCP- 84.

(illus)

1.Set the adapter’s voltage switch to 3V.

2.Insert the 3.4 mm outer diameter/1.3 mm inner diam- eter barrel plug into the AC adapter’s socket. Line up TIP on the plug with –NEG on the socket.

9