English
16
"The projector has the multilingual On-Screen Display(OSD) menus that allows you
to make image adjustments and change a variety of settings. In computer
source, the OSD will be the “Computer OSD”. In Video source, the OSD will
be the “ Video OSD”. The projector will detect the source automatically.
"To open the OSD menus, press the “Menu” button on the Remote Control or Panel
Control.
"To select among different menus, press the” Menu” button again. Then use
“Up” & “Down” keys to select different items and use “Right” & “Left” to adjust
your selection.
"To exit the OSD, press the “Freeze/CLR” button or choose the “Exit Menu” and
press “Enter” button.
OSD Menus"Brightness
Adjusting the brightness of the image.
lPress the left key to darken the image.
lPress the right key to lighten the image.
"Color Temperature
Adjusts the color temperture. The range is from 6000°K to 9000°K . The factory default is 7900°K .
With the higher temperature, the screen looks colder; with the lower temperature, the screen
looks warmer.
"Contrast
The contrast controls the degree of difference between the lightest and darkest parts of the
picture. Adjusting the contrast changes the amount of black and white in the image.
lPress the left key to decrease the contrast.
lPress the right key to increase the contrast
"Keystone Correction
Adjusts image distortion caused by tilting the projector.
How to operate
Language
"Language
You can display the multilingual OSD . User “ Up” and “ Down” key to select. The menus redrew
immediately.