Optoma Technology HD25LV manual Setup Security

User Controls

SETUP Security

Security

SETUP

Security

Security Off

Security Timer

Change Password

Exit

`` On: Choose “On” to use security verification when the turning on the projector.

`` Off: Choose “Off” to be able to switch on the projector without password verification.

™™ Pass-code default value is “1234” (first time).

Enter Current Security Code (4 digits)

Incorrect security code. Re-enter again. (Last Try)

Security Timer

Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this time has elapsed you will be requested to enter your password again.

Change Password

`` First time:

1.Press “ ” to set the password.

2.The password has to be 4 digits.

3.Use number button on the remote to enter your new password and then press “ ” key to confirm your password.

`` Change Password:

(If your remote does not have a number keypad, please use the up/down arrows to change each digit of the password, then press enter to confirm)

1.Press “ ” to input old password.

2.Use number button to enter current password and then press “

” to confirm.

3.Enter new password (4 digits in length) using the number but- tons on the remote, then press “ ” to confirm.

4.Enter new password again and press “ ” to confirm.

`` If the incorrect password is entered 3 times, the projector will automatically shut down.

`` If you have forgotten your password, please contact your local office for support.

English 44