User Controls
How to use web browser to control your projector
1.Turn on DHCP to allow the DHCP server to automatically assign an IP, or manually enter the required network information.
4.Based on network
2.Then choose apply and press “
” button to complete the configuration process.
3.Open your web browser and type in from the OSD LAN screen then the web page will display as below:
Category | Item | ||
(characters) | |||
|
| ||
| IP Address | 15 | |
|
|
| |
Crestron Control | IP ID | 2 | |
| Port | 5 | |
|
|
| |
| Projector Name | 10 | |
Projector | Location | 9 | |
| Assigned To | 9 | |
| DHCP (Enabled) | (N/A) | |
Network | IP Address | 15 | |
Subnet Mask | 15 | ||
Configuration | |||
Default Gateway | 15 | ||
| |||
| DNS Server | 15 | |
| Enabled | (N/A) | |
User Password | New Password | 15 | |
| Confirm | 15 | |
| Enabled | (N/A) | |
Admin Password | New Password | 15 | |
| Confirm | 15 | |
|
|
|
When you used the projector IP ad- dress, you will can not link to your service server.
English 46
