Optoma Technology TW6313D appendix Connecting Video source devices, EN-17

Connecting Video source devices

You can connect your projector to various Video source devices that provide any one of the following output sockets:

„HDMI

„Component Video

„S-Video

„Video (composite)

You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a different level of video quality. The method you choose will most likely depend upon the avail- ability of matching terminals on both the projector and the Video source device as described below:

Terminal name	Terminal appearance	Reference	Picture quality
HDMI	HDMI	“Connecting an	Best
		HDMI source
		device” on
		page 18	Better
Component	VGA1-IN/YPbPr or	“Connecting a
Video	VGA2-IN/YPbPrComponent Video
		source device” on
		page 18	Good
S-Video	S-VIDEO	“Connecting an
		S-Video source
		device” on
		page 19	Normal
Video	VIDEO	“Connecting a
		composite Video
		source device” on
		page 20

Note

„Not all models have HDMI input jack, please check your projector before connecting

EN-17