Appendices
The screws on the | 1 | 2 | |
3 | |||
lamp cover and the |
| ||
lamp cannot be |
| 4 | |
removed. |
| ||
|
| ||
The projector |
|
| |
cannot be turned |
|
| |
on if the lamp |
|
| |
cover has not been |
|
| |
placed back on the |
|
| |
projector. |
|
|
Do not touch the glass area of the lamp. Hand oil can cause the lamp to shatter. Use a dry cloth to clean the lamp module if it was accidentally touched.
Lamp Replacement Procedure:
1.Switch off the power to the projector by pressing the “
” button.
2.Allow the projector to cool down for at least 30 minutes.
3.Disconnect the power cord.
4.Unscrew the one screw on the cover. 1
5.Lift up and remove the cover. 2
6.Unscrew the three screws on the lamp module. 3
7.Lift up the lamp handle and remove the lamp module slowly and carefully. 4 To replace the lamp module, reverse the previous steps.
8.Turn on the projector and use “Lamp Reset” after the lamp module is replaced.
Lamp Reset: (i) Press “Menu” (ii) Select “OPTIONS” (iii) Select “Lamp Settings” (iv) Select “Lamp Reset” (v) Select “Yes”.
English 58
