E N G L I S H
DTX 1200B Getting Ready for Use
TO ASSEMBLE POWER NOZZLE AND TELESCOPIC WAND
WITH CORD MANAGEMENT.
BUTTON
CORD CHANNEL
BUTTON
Connect hose by firmly inserting end of hose into canister intake opening until it clicks.
To disconnect hose, turn hose lock on canister intake to unlock hose and remove.
Insert telescopic wand into power nozzle until button locks. Once assembled, do not disassemble.
Insert power nozzle plug into plug holder on upper end of wand.
Press cord into cord channels.
For convenience, do not disassemble for storage.
Insert power handle into telescopic wand until button locks.
To unlock the wand, step on the release button located on the power nozzle. Gently lean wand back for vacuum use.
Extend telescopic wand by holding telescopic length adjustment and pulling power handle.
Operating Instructions
Polarized Plug Notice
This product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact an electrician to replace the obsolete outlet. Do not defeat the purpose of the polarized plug.
Pull plug from unit and insert into wall outlet.
Press the On/Off pedal located at the rear of the canister to turn on.
If using a power nozzle, turn the power nozzle On/Off by using the switch located on the handle.
6