E N G L I S H
Trouble- shooting
If the following troubleshooting tips do not resolve the problem please contact Oreck Customer Service. U.S.:
IMPORTANT! Always unplug and allow the steam cleaner to cool down before conducting any troubleshooting. See safety warnings.
Problem | Cause | Solution |
Steam Cleaner has | Steam cleaner is not | Insert the plug into |
no power | properly plugged into | an electrical outlet |
| an electrical outlet or | and switch the steam |
| is not switched on. | cleaner on. |
| The socket is faulty. | Check the socket by |
|
| unplugging the steam |
|
| cleaner and plugging |
|
| in a different appli- |
|
| ance. |
No steam is emitted | The power cable is | Contact Oreck for |
when the steam | damaged. | Service. |
cleaner is on. |
|
|
| The water tank is | Fill the water tank. |
| empty. |
|
| The steam nozzle is | See “Unblocking the |
| blocked. | Steam Outlet” |
| Despite the green | Press down the steam |
| light, the steam | switch fully. |
| switch is not activat- |
|
| ed properly |
|
| The weighted tube | Shake the steam |
| inside the tank is not | cleaner gently. |
| in the correct |
|
| (immersed) position. |
|
|
|
|
Only a very small | The steam regulator | Turn the steam con- |
amount of steam | is set to minimum. | troller until sufficient |
flows out of the |
| steam is emitted. |
steam cleaner. |
|
|
|
|
|
Unit still does not | Check all the above | Contact Oreck for |
operate properly. | points. | service. |
|
|
|
11
