9
ENGLISH

WARNING: Unplug cord from electrical outlet before servicing.

Brushroll Maintenance

At least once a month, check for and remove excessive lint, string or hair from the revolving
brushrol l.
A little preventative maintenance will keep your Sweep and Steam looking new and will ensure
continued cleaning effectiveness.

Replacing the Brushroll

The brushroll is designed for long life. Should it ever become worn or frayed, it can be replaced
by an Oreck Authorized Service Center.
Unlock

Cleaning Surfaces / Suggested Steam Settings

Grout on Hard Surfaces Medium to High
Tiled Surfaces Low to Medium
Sealed Hardwood Low

For Deep Sanitizing Clean

Allow unit to heat for one minute.
Set the steam selection button to HIGH STEAM.
Use short scrubbing motions on hard oor area for at least 15 seconds.
General Use & Maintenance

Maintenance

1
2
3
1
Operation
continued
2
3
Wh e n y o u h a v e  n i s h e d s t e a m c le a n i n g , e n s u r e b o t h o f t h e G r a b - I t & S t e a m - It ’ s p o w e r s w i t ch e s
are turned off and that the plug is removed from the wall.
Empty the remaining water from the water ta nk.
Microber steam mop pads can be machine washed at 140 F maximum. For heavily soiled
pads soak in warm water with detergent or a mild stai n remover. Allow cloths to dry
completely before stor ing. NOTE: DO NOT USE FABRIC SOFTENER
1
2
3
IMPORTANT: Rotate screw 1/4 turn until the indicator is aligned with the “unlock” symbol.
Indicator
Lock
Brushroll

Replacing the Hard Water Filter

The hard water lter will help lter
minerals that reduce the effectiveness
of the steam cleaner. Depending
on hard water conditions and/or use
frequency, the lter should be replaced
every 6 months.
NOTICE
The condition of the hard
water lter affects the
performance of the steam
cleaner. The interval
between lter replacement
depends on the hard water
conditions and the level
of usage.
Hard Water Filter