Any walls the signal will have to pass through will reduce distance. An outdoor wall or window will have 20 to 30 feet of resistance and an interior wall will have 10 to 20 feet of resistance. Your distance plus resistance should not exceed
80 feet in a straight line.
NOTE: Fog and mist will not harm your remote temperature sensor, but direct rain must be avoided. To complete the setup of your indoor temperature station after the 10 minutes have passed, please follow the steps below:
1.To set the time, press and hold the "SET" button for 5 seconds.
Note: A "12h" or "24h" will appear on the top line. ("12h" for AM/PM, "24h" for military time)
a.To change between "12h" and "24h" press and release the "MIN/MAX" button.
b.When you have your choice shown on the display press and release the "SET" button once.
2.Degrees Fahrenheit will now show.
a.To change between Fahrenheit and Celsius, press and release the "MIN/MAX" button.
b.When you have your choice shown on the display press and release the "SET" button
once.
4
