EN
To end auto-scan:
Press CHANNEL or MEM.
To toggle between current, minimum and maximum records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.
TEMPERATURE AND PRESSURE TREND
The temperature and pressure trend icons are based on recent sensor readings.
RISING | STEADY | FALLING |
|
|
|
ICE WARNING
If the channel 1 sensor falls between 3°C to
NOTE The warning will automatically stop if the temperature goes outside the
HI / LO TEMPERATURE ALARM
An alert can be set to sound if the sensor set to channel 1 records above or below a temperature of your choice.
To set alarm ON / OFF:
1.Press and hold TEMP HI / LO .
2.Use and to select high / low temperature alarm. Press TEMP HI / LO to confirm.
3.Press / to set alarm ON / OFF and press TEMP HI / LO to confirm.
4.If alarm has been activated, use and to select the temperature.
5.Press TEMP HI / LO to confirm.
To silence the hi / lo temperature alarm:
Press any key. The alarm resets automatically and will resound if the hi / lo temperature is exceeded again.
MOON PHASE
•When calendar is set press or to view the moon phase for the next/previous day.
•Press and hold or to scan through the years (2001 to 2099).
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent
8