Oregon Scientific BAR386 Sensor Data Transmission, Reception Signal, Clock Clock Reception, Icon

EN

SENSOR DATA TRANSMISSION

The sensor reception icon in the remote sensor area shows the status.

ICON	DESCRIPTION
	Main unit is searching
	for the sensor(s)
	A channel has been found
	and sensor signal is being
	received

The clock collects the radio signals whenever it is within 1500 km (932 miles) of a signal.

NOTE Slide the EU / UK switch to appropriate position for your location. Repeat each time you reset the unit.

NOTE Initial reception takes 2-10 minutes for first set up or when RESET is pressed. Once complete, the reception icon will stop blinking. If the signal is weak, it can take up to 24 hours to get a valid signal.

and "- - . -"	The sensor cannot be found.
(Outdoor	Search for the sensor or check
temperature area)	batteries

To search for a sensor:

Simultaneously, press and hold MEM and CHANNEL for 2 seconds.

RECEPTION SIGNAL

Clock signal reception indicator:

STRONG SIGNAL WEAK SIGNAL

NO SIGNAL

NOTE If the sensor is still not found, check the batteries, obstructions, and remote unit location.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its date and time automatically once it is within range of:

•DCF-77 generated from Frankfurt, Germany for Central Europe.

•MSF-60 generated from Anthorn, England.

To enable and force a signal search:

Press and hold for 2 seconds.

To disable the signal reception:

Press and hold for 2 seconds.

SET CLOCK

If the clock signal reception is enabled and a signal is being received the clock does not need to be manually set.

1.	Press and hold MODE for 2 seconds.
2.	Press or to change the settings.
6