EN
to initiate search and start receiving time and temperature data from the sensor.
The sensor reception icon shows the status:
ICONS | MEANING |
| |||||||||
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| Main unit is searching | ||
|
|
|
|
|
|
|
|
| for sensor(s) | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| A | sensor | channel |
|
|
|
|
|
|
|
|
| has | been | found and |
|
|
|
|
|
|
|
|
| logged on |
| |
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| No sensor found | ||
|
|
|
|
|
|
|
|
|
|
|
|
NOTE After every sensor initialisation, the main unit may take up to 30 minutes to receive the time from the sensor.
8.Secure the sensor in the desired location using the wall mount hole or double sided adhesive tape.
For best results:
•Place the sensor within 30 m (100 ft) of the main unit.
•Place the sensor out of direct sunlight and moisture.
•Position the sensor so that it faces the main unit, minimizing obstructions such as doors, walls and furniture.
•Place the sensor in a location with a clear view to the sky, away from metallic / electronic objects.
•Position the sensor close to the main unit during cold winter months as
TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.
NOTE Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.
CLOCK
CLOCK RECEPTION
4
This product is designed to synchronize its clock automatically with a clock signal received from provided remote sensor.
To enable / disable signal reception:
Press and hold UP to enable or DOWN to disable signal reception.
BAR610P_M_EN_R3.indd 4
12/9/08 17:55:46
