EN STRONG SIGNAL WEAK SIGNAL NO SIGNAL
To force a manual search for Atomic Clock signals, press and hold 
for 2 seconds. If no signal is found, check the batteries.
NOTE If the Atomic Clock signal is received and the hour is incorrect, use the “timezone offset” feature to adjust it to the appropriate timezone. Please see “Set Clock” section for instructions.
TURN ATOMIC CLOCK ON / OFF
Perform this step if you cannot receive Atomic Clock signals. Press and hold 
for 2 seconds. Then, manually set the clock following the “Set Clock” instructions.
The signal icon indicates that the Atomic Clock feature is ON. No icon means that it is OFF.
2.Select the time zone, hour, minute, year, month, day,
and language. Press 
or 
to change the setting. Press MODE to confirm.
NOTE The language options are (E) English, (F) French, (D) German, (I) Italian, and (S) Spanish.
NOTE The time zone options are (PA) Pacific, (CE) Central, (MO) Mountain, and (EA) Eastern.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and Clock with Weekday display.
ALARM
This product is equipped with a
VIEW ALARM SETTINGS
Press ((•)). The alarm time status will show in the Clock Area.
SET CLOCK
You only need to do this if you have disabled the Atomic Clock feature (for example, if you are too far from or cannot receive a signal).
1.Press and hold MODE for 2 seconds. The Clock Area will blink.
SET ALARM
1.Press ((•)) to switch to alarm display.
2.Press and hold ((•)) again for 2 seconds. The alarm settings will blink.
3.Select the hour and minute. Press 
or 
to change settings. Press ((•)) to confirm.
8
BAR888RA_EN_R15 | 8 | 4/12/05, 9:43 AM |
