Oregon Scientific IWA-80051 manual About the Moon Phase, Weather Forecast, Atomic Clock Feature

•When the alarm is sounding, pressing [SNOOZE/ LIGHT] can stop the current sound and advance to enter snooze period.

•When the Alarm function is sounding, if you do not activate the snooze button the 4-step crescendo alarm will automatically snooze once every 4 minutes for a total of 3 times. The alarm duration is 60 seconds.

ABOUT THE MOON PHASE:

The unit has 8 different moon phases. It will change according to the lunar calendar.

1.	New moon	5.	Full moon
2.	Waxing crescent	6.	Waning Gibbous
3.	First quarter	7.	Last quarter
4.	Waxing Gibbous	8.	Waning crescent

NOTE:

The moon and stars are displayed only when the weather is fine and in between 8:00PM to the next day 6:00AM. The weather condition is based on the atmospheric pressure data collected.

WEATHER FORECAST

The built-in barometer can notice atmospheric pressure changes. Based on the data collected, it can predict the weather condition in the next 12-24 hours. The effective coverage area ranges from 20 to 30 miles.

NOTE:

1.The accuracy of a general pressure-based weather forecast is about 70 to 75%.

2.The weather forecast is meant for next 12 to 24 hours. It may not necessarily reflect the current situation.

3.The sun can only appear from 6:00AM to 8:00PM.

Slightly cloudy Cloudy

Storm Sunny Rainy

ATOMIC CLOCK FEATURE

NOTE:

At any time, you can press and hold the [°C/ °F] button for three seconds to make the clock seek the atomic radio signal and set itself automatically. The signal strength indicator will blink on the display as the clock seeks out the signal.

In case of no display on LCD while inserting batteries, use a pin to press the RESET key to activate the clock.

When the signal icon on the clock flashes, this indicates that the clock is receiving the radio signals. When the time code is received the signal icon turns on. If the signal icon does not appear at all and the time is not yet set, please take note of the following:

•We recommend keeping the minimum distance of 8 feet from any interfering source like TV’s or computer monitors.

•Within concrete rooms (basements, superstructures, office buildings), the received signal will be weakened. In extreme cases, the unit should be placed close to a window.

•Avoid placing the unit on or close to any metal objects or surfaces.

•Don’t start reception in a moving article such as vehicle or train.

•During the night, the atmospheric disturbances are usually less severe and reception is possible in most cases. A single daily reception is adequate to keep the accuracy within 1 second.

NOTE:

It is recommended that for the first use of the clock, you set the clock manually and then allow the Radio Control signal to update the time setting each day.

CARE OF YOUR CLOCK

•Replace the battery promptly when necessary and store the clock without batteries when not in use. It is time to replace the batteries when the LCD display becomes dim.

•Clean your clock with a soft cloth or paper towel. Do not use corrosive cleaners or chemical solutions on the clock.

•Avoid putting the clock in a highly humid environment such as poolside or in a bathroom.

•Do not expose the clock to direct sunlight, extreme hot or cold temperatures.

NOTE:

Attention! Please dispose of used unit and batteries in an ecologically safe manner.

DECLARATION OF CONFORMITY

The following information is not to be used as contact for support or sales. Please call our customer service number (listed on our website at www.oregonscientific.com or on the warranty card for this product) for all inquiries instead.

We
Name:	Oregon Scientific, Inc.
Address:	19861 SW 95th Place, Tualatin,
	Oregon 97062 USA
Telephone No.:	1-800-853-8883
Fax No.:	1-503-684-3332

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn more about Oregon Scientific products.

If you're in the US and would like to contact our Customer Care department directly, please visit: www2.oregonscientific.com/service/support.asp

OR

Call 1-800-853-8883.

For international inquiries, please visit: www2.oregonscientific.com/about/international.asp.