EN
4. Press to toggle between your chosen day’s step, distance and calorie display.
IMPORTANT At midnight all accumulated daily data will be stored for a period of 7 days. Therefore, once a memory has been stored for 7 days it is replaced with new data from the 1st day of the new week.
The bar at the bottom of the display will indicate which day’s memory record you are looking at.
CLEAR ALL RECORDS
Press and hold RESET.
ALARM
When in the Clock Mode, press to toggle between the Clock and Alarm Mode.
To set the alarm:
1. Press MODE to navigate to the Clock Mode.
2. Press to switch to the Alarm Mode.
8
3.Press and hold SET to enter the setting mode.
4.Press 
/ 
to change a value and SET to confirm and move on to the next setting.
5.The setting sequence is:
•Hour
•Minute
•On / Off
To stop the alarm sound, press any key.
EXERCISE SCHEDULE REMINDER
Using SmartSync software, you can set up to 7 alarms to remind you to exercise, allowing you to specify an activity goal in steps, distance or calories.
To set a exercise reminder:
For detailed information on the steps needed to set the reminder alarm, see the software Help file.
When a exercise reminder alarm sounds:
1. The unit will beep and remind will flash on the screen.
2. Press to view the preset activity goal type (steps, distance or calories).
PE830_EU_M_EN_R1.p65 | 8 | 2006.8.16, 4:47 PM |
