CONTINUOUS PROJECTION
The AC power adapter must be plugged in to use this feature (→ 8).
Press and hold SNOOZE/LIGHT for 2 seconds. when the projection is on. When activated, the time and alarm status will project continuously.
Press and hold SNOOZE/LIGHT for 2 seconds again to deactivate.
RESET SYSTEM
The RESET buttons are located in the battery compartments for the main and remote units. Press these buttons with the tip of a blunt object (such as a
EN
ball point pen) whenever you change the batteries, or whenever performance is not behaving as expected (e.g., unable to establish radio frequency link with remote unit or automatic clock, etc.) This will return all settings to default value, and you will lose all stored information (minimum / maximum temperature and humidity, preset stations, etc.).
SAFETY AND CARE
Wash the unit with a slightly damp cloth and mild detergent. Avoid dropping the unit or placing it in a location where the antenna or AC power adapter will be stepped on.
21
23 | 8/8/03, 12:03 PM |
