TO DISABLE OR ENABLE AUTO-

SYNCHRONIZATION

In Clock mode, Press DOWN for 2 seconds to disable the auto-synchronization. The unit will not respond to radio signals until you reactivate the synchronization.

To enable auto-reception, press UP for 2 seconds.

SET OR CHANGE THE CLOCK

1.Press SELECT to switch to the Clock Mode. The time will flash.

2.Press and hold SELECT for 2 seconds to enter the setting mode.

3.Select the 12/24-hour format, hour, and minute. Press UP or DOWN to change the setting. Press SELECT to confirm.

EN

ALARM

When activated, the Melody Alarm starts quietly, then gradually becomes louder. It shuts off after two minutes. The LCD display lights up for the first 8 seconds.

The Radio alarm turns on the Radio automatically. It will turn off after 2 hours.

SET ALARM

1.Press SELECT several times until the Alarm area flashes.

2.Press and hold SELECT for 2 seconds to enter the setting mode.

3.Select the hour, minute, and alarm type ( for

Melody Alarm or for Radio Alarm). Press UP or DOWN to change the setting. Press

11

PS-L06_GB-final.p65

13

8/8/03, 12:02 PM

Page 13
Image 13
Oregon Scientific PS-L06U user manual To Disable or Enable Auto Synchronization, SET or Change the Clock, SET Alarm