Oregon Scientific RAR232 user manual Set Time / Date / Language, Set Alarm, Mode/Set

Repeat this step whenever you find that the temperature displayed on the remote sensor is not the same as the outdoor temperature display on the main unit.

CLOCK AND CALENDAR DISPLAY MODES

The clock and calendar share the same section of the display. The calendar is displayed in a day-month format.

Press the MODE	button to toggle between clock and calendar
display modes.

Clock mode Calendar mode

SET TIME / DATE / LANGUAGE

In this mode you can set the time, date, and display language.

If there is a setting you do not wish to adjust, pressMODE/ SET to bypass it.

1.	Press and hold		MODE/SET	for two seconds in clock display
	mode. Press	or	to select 12 or 24 hour format.
2.	Press and hold		MODE/SET	to confirm.

3.Repeat the same procedures to set the hour, minutes, year, month, day-of-month and display language.

4. Press MODE/SET to exit. The display will return to the

clock mode.

TIP: During setting, press and hold	or	to rapidly .
increase or decrease a value.

NOTE The date is displayed in DAY-MONTH format. For the display language, you can choose from English (E), German (D), French (F), Italian (I), or Spanish (S).

SET ALARM

To set the alarm:
1.	Press	once to display the alarm time. If the alarm
	is disarmed, the time will be displayed as				.
2.	Press and hold		for two seconds, The hour digits
	will blink.
3.	Enter the hour by pressing either			or	.
4.	Press	. The minute digits will blink.
5.	Enter the minutes by pressing either			or	.
6.	Press	to exit.
The alarm			icon will be displayed indicating that the alarm
is now armed.

TIP:

• You can also arm or disarm an alarm by pressing the

button. Press MODE/SET to return to clock mode.

• Press any key on the unit to stop the alarm.

7

EN

RAR232A-E CP5.P65 7 10/4/05, 11:29 AM