EN
GETTING STARTED
Position the main unit, rain gauge, and thermo sensor within effective range:
•Rain gauge - 328 feet / 100 meters
•Thermo sensor - 98 feet / 30 meters
IMPORTANT It is recommended that you follow the sequence below when setting up the units:
1.Set up the main unit.
2.Set up the rain gauge, then press and hold SEARCH on the main unit and wait until you receive a signal.
3.Set up the thermo sensor, then press and hold SEARCH on the main unit and wait until you receive a signal.
4.In the event that you do not obtain a signal from a remote unit please repeat the process above.
MAIN UNIT
1.Insert the batteries, matching the polarity (+ and
6
2.Press RESET, or press and hold SEARCH on the main unit to initiate operation. The reception icon on the main unit will blink while it is searching for the sensor or rainfall gauge.
NOTE Every time the battery in the main unit is changed, repeat installation before use.
RAIN GAUGE (PCR122)
1.Insert the batteries, matching the polarity (+ and
2.Mount the rain gauge on a level surface.
6 | 4/6/05, 5:46 PM |
