DATA TRANSMISSION

Data is sent from the remote thermo sensor approx. every 78 seconds and every 94 seconds from the rain gauge. The reception icon shows the status - see table.

THERMO SENSOR

RAIN GAUGE

DESCRIPTION

Searching

Connected

Disconnected

If without obvious reason the main unit display shows that the thermo sensor or rainfall connector is disconnected, press and hold SEARCH to enforce an immediate search.N

If that fails, check:

The remote rain gauge and thermo sensor are still in place.

The batteries of the main unit, rain gauge, and thermo sensor are still good. Replace them if necessary.

The transmission is within range and path is clear of obstacles and interference. Shorten the distance if necessary. Then press and hold SEARCH again.

9

EN

LOW BATTERY WARNING

There are 3 low-battery indicators - see table.

UNIT

LOCATION ON MAIN UNIT DISPLAY

 

 

Main

Indoor Temperature Area

 

 

Remote Thermo Sensor

Outdoor Temperature Area

Rain Gauge

Total Rainfall Area

Replace the batteries immediately when the respective indicator lights up.

CLOCK / CALENDAR SETTING

Press TIME / SET to toggle among today's rainfall, time, date, and year.

SET CLOCK & CALENDAR

1.Press TIME / SET to display the clock or calendar.

2.Press and hold TIME / SET for two seconds.

3.Use or to set the desired value.

4.Press TIME / SET to confirm.

5.Repeat steps 3 and 4 to complete all settings.

6.The order of the settings is hour, minute, year, month and day.

RGR126(R13)-4(final)

9

4/6/05, 5:46 PM

Page 9
Image 9
Oregon Scientific RGR126 user manual LOW Battery Warning, Clock / Calendar Setting, Data Transmission, If that fails, check