3.The alarm is automatically activated. To deactivate it, press ALARMonce.
ALARM AND SNOOZE FUNCTION
When the alarm is set, it will activate at the set time. The back light
will go on for five seconds and the 
] will flash.
The crescendo function allows the alarm to start gently and step up its intensity in three steps. Without interruption, the alarm will activate for 2 minutes.
To stop | the alarm, press ALARM button. If the |
[ | ] button is pressed, the snooze function |
will be triggered. The alarm will stop for eight minutes before activating again.
INDOOR TEMPERATURE
The temperature is shown in Fahrenheit (°F). The unit is capable of measuring temperatures within the 23°F and 122°F range. If the temperature goes above or below that, the display will show “HHH” or “LLL”.
HOW TO RESET THE UNIT
The RESET button allows you to return all settings to its factory values.
The button is required only when the unit is not operating in a favorable way, such as in the rare case of a malfunction.
GB
PRECAUTIONS
This unit is engineered to give you years of satisfactory service if you handle it carefully. Here are a few precautions.
1.Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft,
2.Do not clean the unit with any alcohol containing detergent, abrasive or corrosive materials. They may scratch the plastic parts and corrode the electronic circuit.
3.Do not subject the unit to excessive force, shock, dust, temperature or humidity, which may result in malfunction, shorter electronic life span, damaged battery and distorted parts.
4.Do not tamper with the unit’s internal components. Doing so will invalidate the warranty on the unit and may cause unnecessary damage. The unit contains no
5.Only use fresh batteries as specified in the user’s instructions. Do not mix new and old batteries as the old ones may leak.
6.Always read the user’s instructions thoroughly before operating the unit.
5
