REMOTE SENSOR
1.LED status indicator
2.Wall mount hole
3.Battery compartment
4.RESET hole
5.CHANNEL switch
GETTING STARTED
INSERT BATTERIES
1.Remove the battery compartment.
2.Insert the batteries, matching the polarities.
3.Press RESET after each battery change.
LOCATION | MEANING | |
|
| |
Clock / alarm | Main unit batteries low | |
|
| |
Outdoor temperature | Sensor batteries low | |
and humidity area | ||
| ||
|
|
EN
REMOTE SENSOR
The main unit can collect data from up to 3 sensors.
To set up the sensor:
1.Open the battery compartment.
2.Select a channel then press RESET.
3.Close the battery door.
4.Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount.
TIP Ideal placements for the sensor would be in any location on the exterior of the home at a height of not more than 1.5 m (5 ft) and which can shield it from direct sunlight or wet conditions for an accurate reading.
1.5 m (5 ft)
3
