Kinetic- |
|
|
|
| |
wave |
|
|
|
| |
Icon |
|
|
|
| |
|
|
|
|
| |
Designat- | Indoor | Remote | Remote | Remote | |
ed | Display | Display | Display | ||
Display | |||||
Display | Channel 1 | Channel 2 | Channel 3 | ||
| |||||
|
|
|
|
|
To
NOTE If you use a sensor that collects only temperature data, humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
Press MEM to toggle between current, maximum (MAX) and minimum (MIN) records for the selected sensor. To clear the records, press and hold MEM for 2 seconds.
A beep will sound to confirm that the memory has been cleared.
COMFORT ZONE
The Comfort Zone indicates how comfortable the climate is, based on current temperature and humidity
measurements.
11
EN
ZONE | TEMPERATURE | HUMIDITY |
| Any | >70% |
|
|
|
| 20 – 25 ° C | 40 – 70% |
| (68 - 77 ° F) |
|
|
|
|
| Any | <40% |
This information is shown in the Humidity Area when the current measurement is displayed.
RESET SYSTEM
The RESET buttons are located in the battery compartment for the main unit and sensors. Press RESET when you change the batteries and whenever performance is not behaving as expected (for example, unable to establish radio frequency link with remote sensor or
NOTE When you press RESET, all settings will return to default value, and you will lose all stored information.
RMR613HGA lab test R2 | 11 | 1/17/04, 5:00 PM |
