EN |
| |
TEMPERATURE AND HUMIDITY | ||
| ||
|
|
The weather station displays indoor and outdoor readings for:
1.Current, minimum and maximum temperatures and relative humidity.
2.Comfort level indicator and trend line.
3.Heat index, wind chill and dew point level.
The weather station can connect up to 10 remote sensors.
NOTE Channel 1 is dedicated for outdoor temperature and humidity.
shows which remote sensor’s data you are viewing.
appears when indoor data is displayed.
The timestamp records the date and time when storing the temperature and humidity readings in memory.
To select the temperature measurement unit:
Press UNIT (at the bottom of the base station) to select °C / °F.
NOTE The unit of all temperature related displays will be changed simultaneously.
To view temperature (Current temperature, Heat Index and Wind Chill):
1.Press SELECT to navigate to the Temperature Area.
will show next to the Area.
2.Rotate the dial left or right to select the channel.
3.Press MODE repeatedly to toggle between the different displays.
4.Press MEMORY / 
ON / OFF to select MAX / MIN display.
NOTE To view wind chill, ensure channel 1
is selected.
To view humidity (Humidity, Dew point):
1.Press SELECT to navigate to the Humidity Area. 
will show next to the Area.
2.Rotate the dial left or right to select the channel.
3.Press MODE repeatedly to toggle between the different displays.
4.Press MEMORY / 
ON / OFF to select MAX / MIN display.
Data | Area | Channels | Type of | |
required | located | supported | memory | |
Current |
| Indoor | MAX | |
Temperature | Temperature | and | MIN | |
Heat Index | outdoor | MAX | ||
| ||||
Wind Chill |
| 1 only | MIN | |
Humidity |
| Indoor | MAX | |
| MIN | |||
| Humidity | and | ||
| MAX | |||
Dew Point |
| outdoor | ||
| MIN | |||
|
|
|
The timestamp is displayed accordingly in the Clock Area.
To clear the memories and timestamp for the temperature, heat index, wind chill, humidity and dew point readings:
In the Temperature or Humidity Area, press and hold MEMORY / 
ON / OFF to clear the readings.
To change the high / low temperature, heat index, wind chill, humidity and dew point alarms:
1.In the Temperature or Humidity Area, press ALARM repeatedly to toggle between high / low alarms for temperature, heat index, wind chill, humidity and dew point readings.
2.Press and hold ALARM to enter the alarm setting.
3.Rotate the dial left or right to set the desired values.
4.Press ALARM to confirm the setting.
To activate / deactivate the high / low temperature, heat index, wind chill, humidity and dew point alarms:
1.In the Temperature or Humidity Area, press ALARM repeatedly to select the desired alarm.
2.Press MEMORY / 
ON / OFF to activate or deactivate the alarm.
NOTE The dew point advises at what temperature condensation will form. The wind chill factor is based on the combined effects of temperature and wind speed.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and humidity readings. The trend is shown as follows:
RISING | STEADY | FALLING |
|
|
|
COMFORT LEVEL
The Comfort Zone icon indicates how comfortable the climate is based on current temperature and humidity measurements:
COMFORTABLE | NEUTRAL | UNCOMFORTABLE |
|
|
|
|
|
|
WIND DIRECTION / SPEED
The base station provides wind speed and wind direction information.
To read the wind direction find the compass point the 
is pointing to.
The timestamp records the date and time when storing the wind speed readings.
10
