Oregon Scientific WS902 Alarm With Wake Up Light, Sleep Timer, Lcd Backlight, Reset, Reading Lamp

EN

ALARM WITH WAKE UP LIGHT

To activate / deactivate wake up light:

•Slide WAKE UP LIGHT switch to ON / OFF.

When wake up light has been activated, will be displayed next to ALARM on the LCD screen.

NOTE Light will fade-in (gradually increase in brightness to maximum) 20 minutes prior to set alarm time. Light Will stay on (even after SNOOZE has been activated) after set alarm time for 60 minutes.

SLEEP TIMER

To adjust sleep timer setting:

1. Turn on desired option:

OPTION	PRESS:
Radio	RADIO
Light	LAMP
Nature sound	NATURE SOUND

2.Press SLEEP to activate.

3.Press SLEEP repeatedly to change the sleep timer setting (120, 90, 60, 30, 15, 0 min).

After 5 seconds of inaction, the timer will automatically be confirmed and set.

TIP Press SLEEP again to change sleep timer (120, 90, 60, 30, 15, 0 min).

NOTE Ensure radio or sound and/or light has been selected to activate sleep timer.

NOTE If light option has been chosen for sleep timer, light will fade out.

READING LAMP

To turn on / off light:

• Press LAMP.

To adjust level of brightness:

•Press /to increase or decrease brightness. TIP Press and hold/ to rapidly change level of brightness (1-20).

For your convenience, the level of brightness will be stored in memory for the next time reading lamp is turned on.

NOTE Do not look directly at the light.

PLAYING MUSIC

Using a cable, plug one end to your music storage device and one end to AUDIO LINE-INlocated at the back of unit.

When cable has been successfully connected, will be displayed on the LCD screen and sound will emit from speakers.

LCD BACKLIGHT

To adjust brightness:

•Slide DISPLAY BRIGHTNESS switch to LOW / HIGH.

RESET

1.Remove and reinsert the batteries.

2.Press RESET to return to the default settings.

SPECIFICATIONS

TYPE	DESCRIPTION
MAIN UNIT
L x W x H	257 x 199 x 140 mm
	(10.12 x 7.84 x 5.51 in)
Weight	1386 g (13.6 oz) without battery
FM	87.5 to 108 MHz
Power	Input: AC 230V 50Hz
	(EU version)
	Input: AC 120V 60Hz
	(US/Canada version)
	2 x UM-4 (AAA) 1.5V batteries
	(for backup)

NOTE

•Connection type of the switch: ε

•Range of lamp load: (Lamp) 20W - 60W

•The apparatus shall not be exposed to dripping or splashing.

•To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.

•The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use.

•No naked flame sources such as lighted candles should be placed on the apparatus.

4