Standby mode
When the handset is not in use is in the standby mode. The LCD will display:
1 BB100 10.37
Where:
1:Handset assigned number
BB100: Handset name
10:37: Time of the day ( 10 AM, 37 minutes) (ex : 23:37 : 11 PM, 37 minutes)
Note: If power is disconnected from your phone, the clock will be inaccurate. When the power is restored, it will be automatically reset the time to 12:00 and the date to 01/01. You need to set the correct time and date when the power is turned on.
If you subscribe to your network operators Caller ID services, your phone clock will automatically set the time and date when you receive CID from the network.
USING YOUR PHONE
To make and end calls:
1) | Press “Talk” button and wait for dial tone. The In Use indicator | |
| and icon will appear in the display. | |
2) | Dial your desired number on handset. | |
3) | Speak into the microphone when the party answers. | |
4) | To end the call, either press ‘Talk” or place the handset back on | |
| the base. The In Use indicator | and icon will disappear. |
Preparatory dialling (pre-dial)
1)In standby mode (i.e. when the phone is not in use), enter the telephone number from the numeric keypad. (up to 25 digits allowed. If the number exceeds 12 digits, the last 12 digits are displayed) you wish to dial; it will appear in the display.
2)
If you have entered a digit incorrectly, you can delete it by pressing
3) | the CANCEL button. | |
If you wish to delete the whole telephone number, press and hold | ||
| ||
| the CANCEL button for 3 seconds. The handset will return to | |
| standby mode. | |
4) | Press TALK button. The displayed number will be dialled. | |
5) | To end the call, either press the TALK button or place the handset | |
| back on the base. |
Receiving external calls
•When you receive an incoming call both your handset and base will ring, provided that the ringers are
set to on. The 
icon will flash in the handset display and the In Use LED on the base will flash as well.
•If you have subscribed to caller ID service, the New CID symbol (see LCD layout) blinks in the display. The caller’s number (if available) is also displayed. The date and time of the call is displayed when OK is pressed.
-8 -
