ABOUT YOUR PHONE | ABOUT YOUR PHONE |
10 Multi-handset use
Your M5000 series phone can have up to 5 handsets registered to 1 base unit. Each handset has its own number
• Make intercom calls while on an outside call
•Switch between an out side call & intercom call
•Transfer an out side call from one handset to another
•Set a
Notes
• A maximum of 1x outside call & 2x intercom calls can take place per base unit.
• If you make an outside call + another handset is on line = result is a busy tone.
• If you make an intercom call + one is already in progress = result is a busy tone.
Make an intercom call
1. Press INTERCOM button. When you hear your outgoing message, press 
2. Key the handset number 1, 2, 3, 4, OR 5, you wish to call.
3. On the RECIEVING handset, press PHONE button.
4. To end, press PHONE button on the CALLING handset. The RECIEVING handset will hear a busy tone.
Transfer a call between handsets
1. Press INTERCOM button.
2. Key the handset number 1, 2, 3, 4, OR 5, you wish to call.
3. On the RECIEVING handset, press PHONE button to receive call.
4. Press PHONE button on the CALLING handset to transfer. Call will return back within 90 seconds if unanswered.
Transfer a speakerphone call to a handset
1.Press HANDSET LOCATOR button on the base unit.
2.Press PHONE button on the handset to pick up call.
Switch between calls
An outside call + an intercom call in progress, you switch between the 2 calls:
1. Press INTERCOM button to speak to outside call, while the intercom call is on hold.
2. Press INTERCOM button again to speak to intercom call, while outside call is on hold.
3. Press PHONE to transfer outside call to the other handset (while connected to intercom call).
Note
•If you press the PHONE button while connected to the outside call, you will
disconnect
• If the other handset user presses the PHONE button to hang up, you will be left with the outside call
M5000 User guide.doc Page 15 of 20 |
| M5000 User guide.doc Page 16 of 20 |
