Getting Started
4.Plug one end of the AC power adaptor into the charging pod and then the AC adaptor into the power socket.
5.Slide the radios into the charging pod ensuring the charging contacts line up. The red lights on the charge pod glow when radios are properly inserted.
6.The batteries will be fully charged within 14 hours.
IMPORTANT NOTE
1.When moving between hot/cold environments do not charge the battery until the battery temperature acclimates (usually about 20 minutes).
2.Batteries can cause property damage and/or bodily injury such as burns if a conductive
3.The conductive material may complete an electrical circuit (short circuit) and become quite hot.
4.Exercise caution in handling any battery, particularly when placing it inside a bag, pocket, purse or any container with metal objects.
Attaching the belt clips
Attaching the belt clips (2 included)
Each radio is supplied with a belt clip.
To attach, align belt clip post with hole in the back of the radio and gently push until it clicks into place.
Removing the belt clip
To remove, push release tab on top of belt clip down to release catch and pull belt clip
from the back of the radio.
12
