Oricom TP110 manual Call Timer, Ringer Volume Control, Earpiece volume amplification control

5.6 How To Turn on Telstra call waiting (Australia)

You can use the RECALL button to answer a second call while you are on the phone. However this service will need to be turned on. For example to turn on Telstra’s Call Waiting service:

1.Lift the handset and wait for dial tone then Press *43#.

2.You will hear the service message and then hang up.

Take two different calls at the same time

During a call, you will hear two loud beeps periodically to notify you of another incoming call. If you wish to answer this call

1.Press Recall button listen for dial tone then Press 2 to put the current call on hold and talk with the second caller.

2.Subsequent presses of Recall button listen for dial tone then Press 2 will toggle you between these 2 callers.

5.7 Call Timer

Immediately after dialling a telephone number a call timer will be shown on the display. The timer is a simple way to help you keep track of how long the call lasts.

5.8 Ringer Volume Control

The ringer sound level can be adjusted by sliding the RINGER switch. Select high (HI) or soft (LO) sound level. When you don’t want to be disturbed, slide the RINGER switch to the Off position.

The bright Red light (LED) on the base will flash with all incoming calls.

5.9 Volume Control

Speaker Volume Control

You can adjust the speaker volume level that suits you by sliding the VOLUME switch.

Earpiece volume amplification control

The volume control enables you to adjust the earpiece volume on the handset.

Rotate the volume switch on the base to select a comfortable listening level (1 lowest-9 loudest), the red LED will turm on.

WARNING

Setting the receiver volume to maximum may, under some situations cause ear damage. We suggest returning the volume control to the 0 position after each call.

8