WARNINGS
WARNINGS
Before installing or changing the battery make sure that the telephone is not connected to the telephone network or the mains power supply.
When inserting batteries into this product, observe the proper polarity or direction, failure may result in leakage or explosion.
Remove the batteries from this product if it will not be used for a long time (several months or more) since during this time the batteries could leak.
Batteries must be disposed of in accordance with the applicable waste disposal regulations.
AC ADAPTOR
Use only the mains AC adapter supplied with this product. Incorrect adapter polarity or voltage can seriously damage the unit.
AC Adaptor model number:- MKA91000SA
Input: 240VAC 50Hz 150mA
Output: 9.0VDC 1000mA
CAUTION
Always have a corded phone available to be able to make and receive calls to emergency services in case of mains power failure.
Do not use any telephone during an electrical thunderstorm as it is possible to get an electric shock. Refer to information contained in the White pages directory.
BATTERY
It’s not necessary to install a battery for the clock to function. You can install a 9 volt alkaline battery to keep the time and alarm settings in the event of a power cut or the AC adaptor being unplugged for any reason.
We recommend you replace the old battery every 12 months. A leaking battery can destroy your WNS1.
INSTALLING THE 9 VOLT BATTERY
-Before installing or changing the battery make sure that the telephone is not connected to the telephone network or the mains power supply.
-Remove the battery door screw with a small flat blade screwdriver
-Remove the battery door
-Install a new 9 volt alkaline battery.
-Replace the battery door and screw.
-2 -
