Orion #52099 instruction manual Color Menu Figure

Models: #52099

1 13
Download 13 pages 13.9 Kb
Page 7
Image 7
Color Menu (Figure 15)

For bright solar system objects such as the Moon and planets sense up should be set at a minimum or off and the fixed shutter speed should be set to the fastest speed possible to prevent blurring due to atmospheric conditions.

Low light objects require a high value sense up setting such as 8 seconds.

AGC – Analogue Gain Control

Select Checkbox to activate

Auto Gain – When Active use slider to modify gain

Manual Gain – When Active use slider to modify gain

Peak Control

Adjust Peak ratio for highlight suppression

Priority

Select between AGC and slow shutter

SDV Enhance Level – ADVANCED SETTING

Adjust sliders to enhance image

HDV Enhance Level – ADVANCED SETTING

Adjust sliders to enhance image

XDR

Dynamic range setting function based upon adaptive tone mapping

Eclipse

Used to block areas with saturated lighting

Gamma

Gamma Correction Function. Select according to viewing device.

FOG

Used to enhance low contrast image in foggy/snow weather conditions

DNR

Digital noise reduction (Off, Low, Middle, High)

Sharpness

Used to enhance image

Figure 15. The Color submenu.

Color Menu (Figure 15)

Color

Color Mode

Auto (Default) – Automatically switches between Mono and Color based upon the lighting conditions

Mono – black and white image On – color mode activated Off – same as mono

White Balance

AWB – Auto White Balance

AWB is a preset type function whereby white color in the scene is detected and white balance is automatically adjusted, then the setting status is stored. It automatically memorizes the adjusted white balance value every time the AWB button is turned on.

AWB is most suitable for environment with little change in light source. Select checkbox and adjust slider as desired.

ATW – Auto Tracking Balance

ATW functions by detecting white color in the scene at a color temperature from 3200 to 10000 Kelvin. The color temperature is being monitored continuously and the white balance is set automatically by internal controller.

ATW is most suitable for viewing objects with changing color temperature and which can make the picture color look more natural.

Select checkbox and adjust slider as desired.

12

13

Page 7
Image 7
Orion #52099 instruction manual Color Menu Figure