Orion SH-1250 manual

SOLUS SH-1250Handheld

The SOLUS SH-1250 is a handheld dive light designed to deliver

extremely high performance in a compact package. The SH-1250 has a

number of functions, which are accessed by the rotating selector ring

(figure 1)

For simplicity we have broken these down into two levels (Basic and

Advanced Functions).

fig 1 fig 2

The selector ring can rotate through 360 around the main body of the

light. Within one rotation there are four detent positions at 90 spacings.

Two of these positions are marked with a red dot on the head of the light,

one large and one small. (fig 1)

FULL POWER When the red dot on the selector ring is aligned with the large

red dot on the head, the light will switch on at full power

(100%)

Burn time on this setting is 75 minutes.

LOW POWER When the red dot on the selector ring is aligned with the

small red dot on the head the light will switch on in low power

mode (30%)

Burn time on this setting is 240 minutes.

OFF Rotating the selector ring to either of the unmarked positions

will switch the light off. (There will be a short delay before the

light turns off)

BATTERY Turn the selector ring to the FULL POWER position for a

minimum of 10 seconds and then turn off. The status

indicator LED (fig 3) in the centre of the main LED array will

indicate the battery condition

SOLUS Submersible Products Ltd

15a Kennilworth Park, Harolds Cross, Dublin 6W, Ireland

Tel: +353 (0) 1 406 7456 or email info@ssp.ie