Orion Car Audio 3002, 2002 manual End Panel Layout

END PANEL LAYOUT

1.Power LED - when lit indicates that the amplifier is on.

2.Stereo/Mono Switch - configures the amplifier for one or two inputs.

3.RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

4.Gain Control - continuously adjusts from 200mV to 5V for full power output.

5.High-Level Input Connector - accepts input from head unit's speaker output.

6.Crossover Switch - configures the front channel for high-pass, low-pass, or full range operation.

7.INTELLi Bass Control - continuously adjusts from 0 to 10dB of boost centered at 45Hz.

8.Speaker Connections - accepts up to 12-gauge speaker wire.

9.1 ATC Fuse - protects the amplifier from over current situations.

10.REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.

11.Power Connections - accepts greater than 8 AWG power and ground cables.

©2003 Directed Electronics, Inc. 5