Orion Car Audio 3002, 2002 manual Amplifier Wiring, Power Connections, Speaker Connections

Models: 3002 2002

1 18
Download 18 pages 4.22 Kb
Page 8
Image 8
AMPLIFIER WIRING

AMPLIFIER WIRING

Power Connections

Orion 2002 Fuse Size: (1) 25 AMP

Orion 3002 Fuse Size: (1) 30 AMP

Minimum 8 AWG power and ground cable is recommended for acceptable per- formance.

Fuse power wire prior to wire passing through panels or near sharp edges and less than 18" from battery.

Ground amplifier to a good chassis ground as close as possible to the amplifier.

Add extra ground wire (minimum 8 AWG) between the negative terminal of the battery and the chassis.

NOTE: The addition of a ground wire from the battery to the chassis of the vehicle improves the ability of the battery to supply power to the amplifier. This is recom- mended because the current delivery of the factory electrical system was designed only to accommodate electronics supplied by the auto manufacturer.

Speaker Connections

Two Channel Stereo Configuration

Lowest recommended impedance is 2W stereo.

Stereo input should be used for this configuration.

Outputs can be configured for high-pass, low-pass, or full range operation.

©2003 Directed Electronics, Inc.

7

Page 8
Image 8
Orion Car Audio 3002, 2002 manual Amplifier Wiring, Power Connections, Speaker Connections, Two Channel Stereo Configuration