Orion Car Audio HP-4600, HP-2300, HP-2400 Record Your Serial Number And Date, End Panel Layouts

RECORD YOUR SERIAL NUMBER AND DATE

To ensure your warranty (see back cover), please record the following information regard- ing your new amplifier.

Model:	__________________________________________________
Serial Number:	__________________________________________________
Date of Purchase:	__________________________________________________
Purchased from:	__________________________________________________

END PANEL LAYOUTS

HP-2300, HP-2400, HP-2600 Controls

1	2	3	4	5	6	7	8	9	10
HI INPUT	INPUT	LINE OUT							(GREEN)
									POWER
	L CH	L CH	GAIN	INTELLI-BASE REMOTE		LPF	X-OVER	HPF
									PROTECT
									(RED)
						LPF	FLAT	HPF
			MIN MAX	0dB 12dB		50Hz 500Hz		50Hz 500Hz
	R CH	R CH

1.Hi Input (high level input) - Accepts 1V to 10V input from the head unit’s speaker output. The amplifier will automatically wake-up when the input is greater than 1V. High level input harness shown below.

2.RCA Input - accepts RCA input from a head unit, preamplifier, or equalizer.

3.RCA Line Output - provides easy connection to additional amplifiers.

4.Gain Control - continuous adjustment for full power output.

5.Intelli-Bass - continuously adjusts from 0 to 12dB of boost centered at 45Hz.

6.Remote Bass Jack - connects optional HP-RB1 remote bass control to control the bass level from the driver’s seat. This control is only active when the crossover switch is at the LPF setting.

7.LPF (Low-Pass Frequency Control) - adjusts the frequency (50Hz–500Hz) of the upper crossover frequency. When set for this position the optional remote bass control is active.

8.X-Over(cross-over) - activates LPF (low pass crossover), FLAT (all pass), or HPF (high pass crossover).

9.HPF (High-Pass Frequency Control) - adjusts the frequency (50Hz–500Hz) of the lower crossover frequency.

10.Power LED - when illuminated (green) indicates that the amplifier is on.

Protect LED - when illuminated (red) indicates that the amplifier protective cir- cuitry has been activated due to thermal, output short, supply undervoltage or supply overvoltage.

© 2005 Directed Electronics, all rights reserved 3