1.Using a small
2.Remove name plate to expose gear drive assembly.
3.Remove cap from Oster® Gear Grease tube and apply a generous amount of grease to eccentric, gears and bearing, as illustrated.
4.Once finished greasing, replace name plate and tighten screws.
ECCENTRIC, GEAR
AND BEARING
Blade Care and Cleaning
Lubricating
Blades should be oiled regularly to reduce heat and maintain sharpness. Before removing the blade, be sure it has cooled down.
1. | With clipper in off position, push blade | OIL |
| away from clipper with your thumb. |
|
2. | Place 1 or 2 drops of Oster® Clipper and | OIL |
| Blade Lube™ oil on the blade. Wipe | |
| excess oil with a dry, soft cloth. |
|
Servicing of a Double Insulated Appliance
In a double insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a
Replacement parts must be identical to those parts being replaced.
A
WARRANTY: U.S. and CANADA: 1 Year Limited Warranty
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of one year from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.
Removing and Replacing Worn Out Carbon Brushes
Your clipper contains a carbon brush that will wear out with normal use. When this begins to occur, the clipper will operate intermittently. If the clipper does not turn on, this is a sign that the carbon brush is worn out and needs to be replaced.
Important:
•You will need to replace both carbon brushes at the same time, even if only one brush is worn out.
•Use only Oster® carbon brushes. Carbon brushes used in electric motors are carefully selected for size and grain to ensure optimum performance. Using other brushes will compromise your clipper’s performance.
1.Nylon cap
2.Brass cap
3.Spring
4. | Brush tube | 5 | 4 | 3 | 2 | 1 |
5. | Carbon brush |
To remove and replace carbon brush, follow below instructions:
1.Unscrew and remove brush cap.
Tip: A dime is an ideal tool for loosening the cap.
2.Pull out nylon cap and brass cap with your fingers by using a “picking” action.
3.Remove spring and carbon brush.
4.Inspect length of carbon brush. Replace KEEPif length is reduced to 5 mm or less.
5.To insert new carbon brush, hold the brush and turn it until it falls into place.
6.If spring became loose, insert it into
7.Place brass cap over the spring, press- REPLACE ing down to seat brass cap into the
brush tube.
8.Insert nylon cap over brass cap.
9.Replace brush cap and turn clockwise to screw securely into place.brush tube.
3.Turn on clipper and push blade toward clipper until it snaps securely into place.
Cleaning
1.Clean the excess hair from your blades by using the cleaning brush.
2.To clean the blades, plug clipper into electrical outlet and turn on.
3.In a shallow pan, immerse blade teeth into Oster® Blade Wash® cleaning solution.
CAUTION: DO NOT IMMERSE THE CLIPPER.
4.Remove blade from cleaning solution and while holding clipper blade end down, wipe the blades with a dry, clean cloth.
5.If after cleaning, you find that the blades still do not cut properly, it is possible that a few fine pieces of hair are still trapped between the blades.
6.If this occurs, remove the blade. Without loosening the tension springs screws, slide the upper blade to one side but not completely out from under the tension spring.
7.Wipe the surface between the blades clean with a dry cloth. Place a drop of oil where the upper and lower blades meet and in the guide slot of the tension spring.
8.Slide upper blade to the other side and repeat process.
Sharpening
Oster® cutting blades are of individual
Storing Your Clipper
Store your clipper in a clean, dry space. Be careful not to tangle the cord while storing the clipper. Do not wrap cord around the clipper when storing. This can damage the cord insulation.
“DOUBLE INSULATED”
The symbol may also be marked on the appliance.
When using or cleaning this clipper, do not use any non Oster approved aerosol sprays or blade washes, especially those containing methylene chloride, dimethyl benzyl ammonium chloride, or
How To Obtain Warranty Service
™
Or an Authorized Service Center
Send this product to our Oster Direct® service center located at 904 Red Road, McMinnville, TN
In the U.S.A.
If you have any question regarding this warranty or would like to obtain warranty service, please call 1 800
In Canada
If you have any question regarding this warranty or would like to obtain warranty service, please call 1 800
•Fill out and attach the Service Information Form (found at the end of this manual) to the Product.
•If returning a clipper, include blades.
•When ordering parts, please specify the model number and series letter indicated on your product.
•Include a copy of the original sales receipt.
•Carefully package the product and send either mail or courier with shipping and insurance prepaid to the service center.
This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts
of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s Liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.
Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.
JCS shall not be liable for any damages of any kind Resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A.
If you have any question regarding this warranty or would like to obtain warranty service, please call 1 800
In Canada
If you have any question regarding this warranty or would like to obtain warranty service, please call 1 800
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO NOT RETURN THIS PRODUCT TO ANY
OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
For service, please contact:
North America:
Oster Direct® Services
904 Red Road, McMinnville, TN 37110
(800)
or an Authorized Service Center
© 2012 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431. Printed in USA
PN 155512 |
8/7/12 11:03 AM
