Jar Features

Your new blender features a uniquely shaped oval jar that is designed to fit in most refrigerator doors for convenient storage of drinks. This new jar design creates a figure eight vortex ensuring that all ingredients are blended efficiently for outstanding drink results.

Your new blender is equipped with a pitcher-style, flip-top lid so you don’t have to remove the lid for pouring.

Speed Modes: Low, Medium, High

To blend in High Speed, press the “HIGH” button.

To blend in Medium Speed, press the “MED” button.

To blend in Low Speed, press the “LOW” button.

To Stop blending, press the “ON/OFF” button. The motor will come

to a stop. (Pressing the “ON/OFF” button stops the motor and turns off the blender.)

You can move between speeds at any time while blending by pressing any of the other speed buttons. The new speed will start without interruption.

Pressing the “PULSE” Button will give a momentary pulse at high speed.

The motor will then stop.

NOTE: Pressing the “ICE CRUSH or DRINKS” or the Speed button at which it is blending will also stop the motor.

Pre-Programmed Settings

Your new blender features 2 Pre-Programmed Settings: “Ice Crush” and “Drinks”.

The “ICE CRUSH” setting is ideal for crushing larger quantities of ice. The “ICE CRUSH” mode pulses between high and off for 30 seconds and will automatically shut off at the end of the cycle.

The “DRINKS” setting is designed for perfectly blended frozen drinks. The “DRINKS” setting runs on high speed for 45 seconds and will automatically shut off at the end of the cycle.

To stop blending in either of these settings, press the “ON/OFF” button. The motor will come to a stop. (pressing the “ON/OFF” button stops the motor and turns the blender off.)

Pressing the “PULSE” button will give a momentary pulse at high speed.

The motor will then stop.

5

Page 5
Image 5
Oster 135518 user manual Jar Features, Speed Modes Low, Medium, High, Pre-Programmed Settings