![Operating Instructions](/images/new-backgrounds/58368/583687x1.webp)
Operating Instructions
Connection and Use
We recommend that you charge your electric wine opener for at least eight hours before using it for the first time. Please follow the instructions for recharging below:
Recharging your Electric Wine Opener
Plug one end of the adapter cord into the base of the recharging unit and the other end into a main socket. Place the Electric Wine Opener into recharging unit ensuring that it is firmly in position and that it is fully engaged with the recharging connection. It will take approximately
30 bottles.
Before removing the cork you must remove any foil from the bottle using the foil cutter provided. (Figure 2)
1Place the Electric Wine Opener on top of the wine bottle making sure that it remains as upright as possible at all times. If you hold the Electric Wine Opener at an angle to the bottle it will not remove the cork properly. (Figure 3)
2Hold the Electric Wine Opener firmly and depress
the lower part of the switch. | Figure 2 |
The corkscrew spiral will |
|
To Operate Your Electric Wine Opener
The Electric Wine Opener is operated by one single switch The switch has two functions. Press the lower part of the switch to remove a cork from a bottle. Press the upper part of the switch to release a cork from the mechanism after you have removed from the bottle. (Figure 1)
Up
Down
Figure 1
turn in a clockwise direction |
and enter the cork, then |
gradually remove it from |
the bottle. When the Electric |
Wine Opener mechanism |
has stopped the cork has |
been fully removed from |
the bottle. |
Figure 3
6 | www.oster.com |
www.oster.com7
5/19/09 5:53:55 PM |