Oster Oster 3.25 CU. FT. Refrigerator, OSDR325B1 instruction manual Changing the Reversible Door

CHANGING THE REVERSIBLE DOOR

CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the door reversal process.

•	Remove the top hinge cover. (See Fig. 1)
•	Using Phillips Head Screwdriver, loosen and remove the
	screws holding the top hinge in place.
• Remove top hinge and carefully lift off the
	freezer door.
• Remove the screw hole plugs from the
	opposite side and insert the plugs in the	Fig. 1
	screw hole openings of the just removed

.screws.

•Open refrigerator door and unscrew two screws from the center hinge bracket while holding the open door in place. (See Fig. 2)

•Remove bracket and lift off refrigerator door.

•While doors are removed unscrew the door stoppers and re-insert on opposite side of door. (See Fig. 3)

•Remove the screw hole plugs from the opposite side and insert the plugs in the screw hole openings of the just removed screws.

•Remove any loose items in the refrigerator and carefully tilt refrigerator and lean against wall. Remove both leveling legs and place in a secure area.

•Loosen the screws holding the lower hinge bracket to the refrigerator door and remove screws and bracket. Remove leveling leg.

•Remove screws from the other side and insert in the previously removed screw holes. Remove leveling leg.

•Remove door pin by turning counter clockwise and re-insert to the underside of the bracket and tighten.

•Align bracket and insert 2 remaining screws into the holes provided. Tighten all the way. Replace leveling legs and place refrigerator in upright position.

•Replace washers and cap over pin. Align hole to the refrigerator door with the door pin and gently push down until firm.

•Insert pin from center hinge bracket into refrigerator door hole and align center hinge bracket holes to the screw holes in the cabinet.

Fig. 2

Fig. 3

6