Locking Pin
TO REMOVE XASP ADJUSTABLE SLICE PLATE ASSEMBLY FROM HOUSING
Open the door all the way and raise the locking pin XP1007 (on top of rear of housing) and the assembly will be free for removal by pulling outward.
Open Door
Thumb Screw
TO REMOVE ATTACHMENT FROM POWER UNIT
Loosen thumbscrew on power unit until hub is free for removal from unit.
PUSHER PLATE REMOVAL
Raise the Pusher Plate and slide it out of the slot in the door XVSD.
OPERATION
1.Stop the power unit (mixer, food cutter, chopper, power drive etc.)
2.Attach the housing of slicer to the attachment socket of the companion machine with the thumbscrew.
Locking Pin
Thumb Screw
3. Select the grater/shredder or slicer assembly to be used. Lift the locking pin and insert the plate and shaft assem- bly into the drive position. Release the locking pin.
Set the slice adjustment (if used) to the proper thickness.
Adjustment
Nut
3
