PAC UPAC-NIS2 manual Nissan Operation Important Conguration Process, Selecting the Input, File

VPW	Arbitration	Class 2	J1850
1 0 0 0 1 1 1 0 1 1 1 1 0 0 1 0 0 1 1 0 1 1 0 0

Class 2 EOD J1850 CRC	Class 2	J1850	Class 2
1 1 1 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0	1 0 0 0 1 1 1 0 1 1 1 1 0 0 1 0 0 1 1 0 1 1 0 0	1 1 1 0 1 0 0 0 0 1 1 0 1 1 0 1 1 1 0 0 1 1 0 0
Nissan Operation

Important Con￿guration Process

If you are installing the uPAC-NIS2 into any of the following vehicles, the SEEK and TUNE buttons will have to be configured in order for the interface to operate properly:

2007-2008 Sentra

2007-2008 Maxima

If you are installing the uPAC-NIS2 into any of the following vehicles, the SEEK button will have to be configured in order for the interface to operate properly:

2007-2009 Versa

Configuring the SEEK button:

Press the RADIO button a few times until SAT is displayed on the screen. Immediately press the SCAN button until SEEKREV is displayed. After six seconds the radio will time out and the SEEK button is now configured.

Configuring the TUNE button:

Press the RADIO button a few times until SAT is displayed on the screen. Immediately press the SCAN button until TUNEREV is displayed. After six seconds the radio will time out and the TUNE button is now configured.

RADIO

E

SCAN

T

SEEKREV

1OR

TUNEREV

Selecting the Input:

Press the RADIO or AM/FM/SAT button a few times until SAT is displayed on the screen. Immediately press the SEEK >> or SEEK button to scroll through the available sources. Once the

source you would like to select is displayed (IPOD or AUX), press the << TUNE or TUNE button to select it.

TUNE

SCRFF•REW

FOLDER

RADIO	SEEK	AUD
	TRACK
	FILE

01-06-2009Pacific Accessory Corporation - Santa Ana, CA 92705 techsupport@pac-audio.com • Voice: 866-931-8021 • Fax: 714-835-3233 • www.pac-audio.com