Removing the Bottom Cover
To remove the Top Cover , first remove the battery (see Removing the Battery), remove the Optical Disk Drive (see Removing the Optical Disk Drive) then perform the following steps:
1. Remove all screws on the bottom of the base unit as shown in Fig. 20
A = M2.5x7 Black
B = M2.5 x 5
Silver
Fig. 20 Bottom Cover
2. Locate and release two screws at the rear of Bottom cover as shown in Fig. 21 .
M2x3 Black
Fig. 21 Bottom cover
NEC Versa M440/PB Easy Note H5 Disassembly Manual | Page 16 |