Packard Bell H5 Removing the Touch Pad

4.Release the Switch Board and LED Board on Top Shield by remove four screws encircle in Fig. 33

M2x3.5 Silver

Fig. 33 Switch Board and LED Board

Removing the Touch Pad

To remove the touch pad, first remove the top shield (see Removing the Top Shield ) then perform the following steps:

1. Unscrew the screws on the Touch Pad Holder as shown in Fig. 34

M2x3 Silver

Fig. 34 Touch Pad

2. Press on Touch Pad Button hock to release Touch Pad Holder as shown in Fig. 35

Fig. 35 Touch Pad Holder

NEC Versa M440/PB Easy Note H5 Disassembly Manual Page 24