Packard Bell MX manual LCD Screen Assembly, 99999

99999 9

4.There are 4 small slots at the location shown in Fig. 11; insert a small flat-blade screwdriver in each slot to unlatch the keyboard.

Fig. 11 Location of latches securing keyboard cover.

5.Tilt the keyboard gently forward.

6.Before removing the keyboard entirely, carefully disconnect the keyboard flat cable from the main board.

LCD Screen Assembly

To remove the LCD screen assembly, remove the battery (see Battery), disconnect the wireless antenna cables (see WLAN Card), and then perform the following steps:

1.Turn the notebook upside down.

2.Remove the 4 screws shown in Fig. 12.

Fig. 12 Removing 4 bottom screws.

3. Turn the notebook over so the top is facing up.

Packard Bell EasyNote MX Disassembly Manual