Palsonic 3490 owner manual Installing Batteries, Button List, TV Functions, Power Switch Status

INSTALLING BATTERIES

1.Remove the battery cover of Remote Control Unit.

2.Insert two AAA 1. 5V batteries making sure the polarity (+ or -) of the batteries matches the polarity marks inside

the unit.

3.Close the battery cover.

NOTE:

*When the Remote Control Unit is not used for a long time or the batteries are worn out, take out the batteries to prevent electrolyte leakage.

*Take care not to drop, dampen, disassemble the Remote Control Unit.

*Operatable remote control range is limited as shown.

BUTTON LIST

Some button behave differently in TV and Teletext. The following list is grouped according to TV or Teletext. If the description of a button is missing in one list, it will be found in the other.

TV FUNCTIONS

1.STANDBY ( )

This turns the set off. The red STANDBY light comes on to show that the set is in STANDBY. If the set is left unattended for long periods it should be switched off with the

POWER SWITCH.

2.STATUS

First press the button to display current program number, colour system and the sleep timer setting etc. Second press the button to display current Teletext information if there is Teletext transmitted.

3.PPR

Press this button to select the Personal Preference preset value of Volume, Brightness, Colour and Contrast.

4.DIGITAL KEYBOARD (0~9)

In single-digit mode, press these buttons to select any of 0~9 channels.

In double-digit mode, press these buttons to select any of 00~59 channels.

5.NORMAL ( / MTOG)

Set all analog at appropriate values.

13