Palsonic 3490 owner manual Operation Instruction, Power Switch and Standby Button

PRESET DOOR

POWER SWITCH	AV IN/OUT
REMOTE SENSOR
POWER INDICATOR

ANTENNA INPUT

SHARPNESS LANG INST PIC SOUND STAND BY - VOL + - PR +

OPERATION INSTRUCTION

POWER SWITCH AND STANDBY BUTTON

Press POWER SWITCH, the TV set will be in STANDBY mode, and the indicator is red.

In STANDBY mode, press any one of the following buttons could turn on the TV: a. STANDBY ( ) on local or remote keyboard; b. DIGITAL 0~9.

Then the indicator is orange and the channel number is displayed in the upper right corner of the screen for 10 seconds.

Sound mute of 1-2 seconds is executed after power on, and TV will tune to the last selected program and the last memorised setting for contrast, brightness, saturation, volume,

etc.

If there has been no TV signal at the current program position for five minutes, the TV set will go into STANDBY mode automatically; and the indicator is red.

In operation mode, press the STANDBY () on local & remote keyboard, the TV will go into STANDBY mode; the indicator is red.

If you do not want to watch TV, press POWER SWITCH again to turn off the TV set's power completely.

2