Palsonic 3499P owner manual To preset channels Manual search

OPERATION

Tuning in (continued)

. Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO-

. SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.

To preset channels (Manual search)

Manual search

If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search.

1.Enter into POS.MEMORY menu, press the or button to

select and highlight POSITION. Press the or button to select a desired position number (from 00~99).

Note: press the or button to select a channel number

within 0.7 second. Press and hold the or button for over 0.7 second to select a decimal number.

POS.MEMORY

POSITION 01

BANDVHFL

SKIPOFF

SEARCH DOWN

MFTDOWN AUTO MEMORY

! ! ! ! ! ! . . . . . .

2.Press the or button to select and highlight SEARCH. Press

the button to search channels from current channel to higher

channel. Press the button to search channels from current channel to lower channel. When a channel is located, the searching stops, this channel is then memorised with the preset channel number.

Note: you can also make use of BAND selection to quicken the searching process in your desired band. Pressing the or button moves the band to the next step in the sequence below.

VHFL VHFH UHF

POS.MEMORY

POSITION 01

BANDVHFL

SKIPOFF

SEARCH DOWN

MFTDOWN AUTO MEMORY

! ! ! ! ! ! . . . . . .

POS.MEMORY
POSITION	01
BAND	VHFL
SKIP		OFF
SEARCH	DOWN
MFT	DOWN
AUTO MEMORY
! ! ! ! ! ! . . .	.	. .

3. When you want to store another channel with another position, repeat steps 1 & 2 above.

8