Samsung SV-DVD54T Using the Timer Programming Feature, Checking a Preset Recording

Using the Timer Programming Feature

The Timer Programming feature allows you to preset the STB-DVD-VCR to record a programme up to one month before that programme is to be broadcast. Up to six programmes can be preset.

☛Before presetting a recording, check that the date and time are correct.

1Insert the cassette and press TIMER on the remote control.

Result: The Timer method is displayed.

Timer Method

Standard

G-Code

2Press the OK button to select Standard option. Result: The TIMER PROGRAMMING menu is

displayed.

3Press ❿ to select the input source.

4 Select the required station by pressing the ,❷ buttons or INPUT SEL. to select the LINE 1, LINE 2 input sources.

5Press ❿ to select the recording day.

6 Select the required day by pressing the or❷ buttons.

7Press ❿ to select the recording start time.

8Select the required hour value by pressing the or❷ buttons.

9Press ❿ to select the minutes.

10Select the required minute value by pressing the or❷ buttons.

11Press ❿ to select the recording stop time.

12Select the required recording stop time by pressing

the	or❷ buttons, following the same procedure
as when selecting the recording start time.
13 Press	❿ to select the recording speed.

14 Press the or❷ buttons to select the SP (Standard Play), LP (Long Play), Auto (Auto Tape speed Select) recording speeds.

15When you have finished, press the RETURN button.

16Press the STANDBY/ON button to activate the timer. Result: Before starting recording, the STB-DVD-

VCR compares the timer duration with the remaining time on the cassette.

➢Auto Tape Speed select. The STB-DVD-VCR’s “Auto Tape Speed select” function compares the duration of the timer recording to the actual recording time remaining on the tape loaded.

If there is insufficient tape to complete a timer recording in AUTO mode, the STB-DVD-VCR automatically switches to LP mode to record the whole programme.

Checking a Preset Recording

You can check your preset recordings:

◆When you have finished presetting the STB-DVD-

VCR

◆If you have forgotten which programmes will be recorded

1Press TIMER on the remote control. Result: The timer selection is displayed.

2Press the OK button to select Standard option. Result: The TIMER PROGRAMMING menu is

displayed.

3 Press the or❷ buttons to select the required programme.

4Press the ➛ or ❿ buttons to select and change any values as required. For more details, refer to the previous page.

5On completion, press RETURN twice.

ENG-21